DIY 215mm Airframe RC Racing Drone 3-4S F4 V2 Flight Control Camera

Wheelbase: 215mm
Support voltage 3-4S
Battery life is about 10 minutes
Remote control distance:
(with Flysky remote control) about 400 meters,
(with TX18S remote control) about 2000 meters
Paddle: 51466
Motor: 2205 2300kv
ESC: 45A BL_S
Flight control: F4 V2
Image transmission: VT5804 0-600mw
Camera: ratel 2
Battery: 3S 1500mah 40C battery (optional, only include in RTF version)
Pls note that:
1 Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become useless). Power off immediately after the battery is fully charged.
2. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then close the remote control to prevent accidents.
3. The product is welded, if you have any questions, please feel free to contact us
4. If you are a beginner, it is recommended to be assisted by an experienced adult
5. When the airplane falls from a high altitude to a wall or hits other objects during flight, please turn off the start switch in time, otherwise it may cause damage to the flight control motor.
Check whether the aircraft is damaged or not, the screws are loose, and wait for everything to be normal before taking off again.
6. Do not modify any parameters and wiring without understanding the flight controller and the remote control.

Returns Accepted for this item if it's within 30 Days